Description
Grinding plant (also known as calcite micro-grinding, limestone micro-grinding mill, calcium carbonate micro-powder mill, talc micro-powder mill, barite micro-powder mill, gypsum micro-powder mill, marble micro-powder mill, feldspar micro-powder mill, fluorite micro-powder mill is mainly suitable for ultra-fine powder processing of non-inflammable and explosive brittle materials with medium and low hardness and Mohs hardness ≤6, over 200 kinds of raw materials can be grinded: it can also be used for pulverizing materials with hardness less than 6 in Moh’s scale and humidity less than 6 percent such as kaolin, limestone, basalt, calcite, marble, talcum, barite, gypsum, dolomite, bentonite mud, mica, pyrophyllite, sepiolite, carbon black, dolomite, graphite, alunite, fluorite, potassium feldspar, phosphorite, pigment, up to 200 kinds.The fine powder finished product can be adjusted arbitrarily between 325-3000 mesh, and the output can reach 0.4-4.5 tons per hour.
The whole set of grinding mill production line consists of Jaw crusher(for big ores stone), hammer crusher, bucket elevator, storage hopper, vibrating feeder, main unit, inverter classifier, cyclone collector, pulse deduster system, high pressure positive blower, air compressors and electrical control systems.
Specification.
| YFM-86 | YFM-198 | YFM-318 | ||
| Feeding materials size(mm) | ≤10 | ≤10 | ≤10 | |
| Material moisture ％ | ≤ 3 | ≤ 3 | ≤ 3 | |
| Finished fineness | mesh | 325–3000 | 200–2500 | 200–2500 |
| micron | 3.5–45 | 5–50 | 5–50 | |
| Output(kg) | 500–4000 | 800–7000 | 1700–12000 | |
| Motor power Consumption(kw) | Main motor | 75 | 132 | 185–200 |
| Classifier | 18.5–22 | 30 | 45–75 | |
| Air blower | 45–55 | 55–75 | 132 | |
| Feeder | 1.5–3 | 1.5–3 | 3 | |
| Discharge screw | 3 | 3 | 3–6 | |
| Air compressor(m3) | 1.5–2 | 2 | 2 | |
| Dimension(mm) | 12000*3100*5900 | 14000*3800*6200 | 15800*5800*7300 | |
| Weight(T) | 17 | 23 | ||
Note: The above parameters are tested by calcite for reference only,there might be slight differences regarding to different materials.
Power consumption
| YFM-86 | YFM-198 | YFM-318 | ||||
| Mesh No. | Output kgs/H | Power consumption Kwh/T | Output kgs/H | Power consumption Kwh/T | Output kgs/H | Power consumption Kwh/T |
| 325 | 6000-6500 | 30 | 10500-12000 | 30 | ||
| 400 | 5600-6000 | 35 | 9500-10500 | 35 | ||
| 600 | 2000-2200 | 50 | 3800-4200 | 45 | 6500-7200 | 45 |
| 800 | 1600-2000 | 60 | 3600-4000 | 55 | 6000-6800 | 55 |
| 1250 | 1200-1600 | 80 | 2200-2300 | 75 | 3700-3900 | 75 |
| 1500 | 800-1000 | 105 | 1500-1800 | 100 | 2500-3100 | 100 |
| 2500 | 500-700 | 150 | 1000-1200 | 160 | 1700-2000 | 160 |
| 3000 | 400-600 | 170 | 700-900 | 180 | ||
Note: The above parameters are tested by calcite for reference only,there might be slight differences regarding to different materials.
Service & support
With a team of experienced engineers with a strong sense of service ,we devoted to build up a complete customer services system with high efficiency to offer high value-added technical support and professional after sale services for customers.
- Pre-sale
1)Equipment sizing assistance based on customer’s demand.
2). Assistance in planning the layout of workshop according to the customer’s site conditions.
3)Free design of the foundation drawing and process flow diagram.
4)Guidance on preparatory work.
- During sale.
1).Strictly control of product production to ensure product quality.
2)Elimination of hidden dangers with strict factory inspectation and traceability system.
3)Providing logistics information.
4)Free guidance on the preparation of equipment foundation.
5)Free guidance for installation and commissioning.
6) Free professional technical training.
- After-sale.
1)Guidance on various powder production process for customer.
2)Periodic follow-up on device usage.
3)Instructions on equipment maintenance.
4)Solution of relevant problems in the shortest time.
5)Timely and efficient replacement of spare parts.
6)Professional and fast equipment maintenance.
Packaging & Delivery
Packaging details:
Seaworthy and long distance transportation sustainable packaging:
1.Sand blasting, coat with high quality paint;
2.Naked packed for heavy and large parts,but wrap by PP-Bubble.
3.Non fumigation wooden box for small parts,spare parts, tools, CNC/PLC.
4.Or as clients request.
